doc

Box and pack standard


Box and pack standard

White Box (private label) and FMX automotive film. Filmax Technologies Inc, Jurupa Valley. Rev. September 2026

Read the part number first

Line

Prefix

Product

Wet / dry

Thickness

Roll format

Cap sheet

FMX

FM

IGN

D

75

6054

C

White Box

MAX

IR

W

75

6054

C

Examples: FMIGND-75-6054-C and MAXIRW-75-6054-C

  • Wet / dry letter is on color film only. W is wet, the standard. D is dry, and the name must say “(Dry)”. Clear film has no letter.
  • Thickness: 75 = 7.5 mil, 85 = 8.5 mil, 9 = 9 mil, 12 = 12 mil.
  • Roll format: 6050 = 60×50, 6054 = 60×54, 48100 = 48×100, 36100 = 36×100, 30100 = 30×100, 24100 = 24×100.
  • C = cap sheet.

Which box, which label

Part number starts with

Products

Box and label

MAX

All White Box products, clear and color

White Box. Standard white label with the part number and White Box name, for example “IR 75”.

FM

Clear family: Eon Grit (EGR), Eon (EON), Lucent (LUC), Kinetic (KIN), Nuance (NUA). Nuance is matte but belongs to the clear family.

FMX box. Pre-printed Clear PPF label.

FM

Every color part number, wet and dry, all 6054

FMX box. Pre-printed Color PPF label.

FM

Sunroof Exterior 55 (FMSUN-75-6050-C)

Label to confirm. Ask a supervisor before packing.

Packing steps

  1. Read the full part number on the roll.
  2. MAX goes in a White Box. FM goes in an FMX box.
  3. For FMX, choose the Clear PPF or Color PPF label from the table above.
  4. For color film, check the letter before the first dash. D must print “(Dry)”; W prints no wet tag.
  5. Print the label and match it to the roll character for character, including the ending -C.
  6. Apply the label, close the box, and stage it with its order.

Never

  • Put FMX film in a White Box, or a MAX roll in an FMX box.
  • Put a white label on an FMX box, or a pre-printed label on a White Box.
  • Print “Big” on any label. It is a system error being corrected.
  • Pack a dry roll against a wet part number, or the reverse.

FMX product codes

Clear family

EGR  Eon Grit, 12

EON  Eon, 9

LUC  Lucent, 85

KIN  Kinetic, 75

NUA  Nuance, 85

SUN  Sunroof Exterior 55

Color, all 75

ABY  Abyss Blue

BLR  Blush Rose

CRY  Crystal Black

DES  Desert Yellow

EMG  Emerald Green

FMB  FilMax Blue

GCW  Glac Ceramic White

GEN  Gentian Blue

 

 

Color, cont.

GLB  Glacier Blue

IGN  Ignition Red

LAV  Lava Orange

LUN  Lunar Silver

MER  Merlot Red

MIA  Miami Blue

MLS  Matte Liquid Silver

MOO  Moonrock Grey

MSB  Matte Black

NAR  Nardo Grey

SBG  Satin Bernato Green

SLA  Slate Grey

SOB  Satin Onyx Black

SRS  Satin Regal Silver

White Box product codes

Clear, 6050

WWX  Hydrophobic 75

WNW  Hydrophilic 75

WMT  Clear Matte 85

Color, 75, 6054, wet

AB  AB 75

BO  BO 75

BR  BR 75

CB  CB 75

DY  DY 75

EG  EG 75

FB  FB 75

GCW  GCW 75

GEB  GEB 75

 

 

Color, cont.

GLB  GLB 75

IR  IR 75

LO  LO 75

LS  LS 75

MB  MB 75

MG  MG 75

MIB  MIB 75

MLS  MLS 75

MR  MR 75

NG  NG 75

SBG  SBG 75

SG  SG 75

SNB  SNB 75

SOB  SOB 75

SRS  SRS 75

Each FMX color has a W and a D part number. White Box codes differ from FMX codes; never swap one for the other.

System corrections pending: “Big” to be removed from FMCRYW-75-6054-C, FMCRYD-75-6054-C and FMSOBD-75-6054-C. FMGLBW-75-6054-C is named “Glacier Blue (Dry)” and is under review. New part numbers to build: FMGCWD-75-6054-C Glac Ceramic White (Dry) and FMSOBW-75-6054-C Satin Onyx Black.

 

 

Current relabel work orders

September 2026. Follow the box and pack standard for every box. Office: build each White Box part number in Odoo before the warehouse starts.

Work order 1: Kinetic 60×50 to White Box WNW

100 rolls: FMKIN-75-6050-C Kinetic Clear PPF 60x50 → MAXWNW-75-6050-C WNW Hydrophilic 75

  1. Choose 100 Kinetic 60×50 rolls that are already palletized together. Take full pallets or full layers first so the rolls left behind stay organized.
  2. Remove the factory label. Apply a standard white label: MAXWNW-75-6050-C, WNW Hydrophilic 75.
  3. Move the 100 rolls in Odoo from FMKIN-75-6050-C to MAXWNW-75-6050-C.

After this order, FMX Kinetic 60×50 stock drops from 240 to 140 rolls. The 48×100, 36×100, 30×100 and 24×100 Kinetic rolls stay FMX.

Work order 2: X75 to White Box WWX

X75 → MAXWWX-75-6050-C WWX Hydrophobic 75

  1. Confirm the X75 serial numbers are in Odoo.
  2. Print and apply a standard white label to each roll: MAXWWX-75-6050-C, WWX Hydrophobic 75.

admin Sept. 16, 2026, 2:22 a.m. 收藏文档